Insert Batteries - TFA Dostmann 60.4517.54 Instrucciones De Uso

TFA_No. 60.4517_Anleitung 14.09.2017 13:54 Uhr
Radio-controlled clock with indoor climate
Thank you for choosing this instrument from TFA.
1. Before you use this product
• Please make sure you read the instruction manual carefully.
This information will help you to familiarize yourself with your new device, to learn all of its functions and parts, to find out important details
about its first use and how to operate it and to get advice in the event of a malfunction.
• Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising
from defects due to incorrect use.
• We shall not be liable for any damage occurring as a result of non following of these instructions.
• Please take particular note of the safety advice!
• Please keep this instruction manual safe for future reference.
2. Delivery contents
• Radio-controlled clock
• Instruction manual
3. Range of application and all the benefits of your new instrument at a glance
• Very clearly laid out with week days written in full letters (in 10 languages)
• For an easier temporal orientation
• Highest precision radio-controlled clock
• With time zone and manual setting option
• Indoor temperature and humidity
• Alarm with snooze function
• Ideal for home, office, waiting room, lobby or entrance hall and as a gift
• Wall mounting or table stand
4. For your safety
• This product is exclusively intended for the range of application described above. It should only be used as described within these instructions.
• Unauthorized repairs, alterations or changes to the product are prohibited.
Caution!
Risk of injury:
• Keep this instrument and the batteries out of reach of children.
• Batteries may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you sus-
pect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent damage caused by leaking. Never use a combi-
nation of old and new batteries together, nor batteries of different types. Wear chemical-resistant protective gloves and safety glasses when
handling leaking batteries.
10
Seite 6
Radio-controlled clock with indoor climate
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks.
• Protect it from moisture.
5. Elements
Display (Fig. 1)
A 1: DCF reception symbol A 2: Alarm symbol
A 3: Time, seconds A 4: Temperature
A 5: Date, weekday A 6: Humidty
Buttons (Fig. 1+2)
B 1: MODE button B 2: SNOOZE button
B 3: ALARM button B 4: + button
B 5: – button B 6: RESET button
Housing (Fig. 2)
C 1: Wall mounting hole C 2: Battery compartment
C 3: Stand (fold out)
6. Getting started

6.1 Insert batteries

• Open the battery compartment and insert four new AA 1.5 V batteries, polarity as illustrated.
• Close the battery compartment again.
• The device will alert you with a beep and all segments will be displayed for a short moment.
6.2 Radio-controlled time reception
• The clock will now scan the DCF frequency signal and the DCF symbol will be flashing on the display. When the time code is successfully received
after 3-10 minutes, the radio-controlled time, the date, the day of the week and the DCF symbol will be shown steadily on the display.
• You can also start the initialization manually.
• Press and hold the – button for 3 seconds.
• The DCF reception symbol will be flashing.
• Interrupt the reception by pressing the – button again for three seconds. The DCF reception symbol disappears.
• The DCF reception always takes place daily at 3:00 o'clock in the morning. If the reception is not successfully received at 3:00 o'clock, the next
DCF reception attempt will happen at 3:00 o'clock in the following morning.
• There are three different reception states:
Symbol is flashing – reception is active
Symbol is solid – reception is very good
No symbol – no reception / set the clock manually
11