Cleaning And Maintenance; Technical Specifications - Perel Tools PRCS2 Manual Del Usuario

4. Description (fig. 1)
1. Switch
2. Bit holder
3. LED light
4. LED light ON / OFF button
5. Direction switch
6. Charging socket
7. Spirit level
5. Charging
Unpack your PRCS2 carefully. Note that the device will not be fully charged. Before first use, charge the device for 5
to 8 hours. To do so, insert the charger plug into the charging socket (6) of your PRCS2. Plug the battery charger into
the mains.
ATTENTION! To avoid overheating the battery, do not exceed the maximum charging time of 8 hours. Do not leave a
charging device unattended.
6. Use
Insert the bit into the bit holder (2). Do not activate the device and make sure the bit holder has come to a full stop.
Place the bit firmly and as straight as possible onto the screw and push the switch to rotate in the desired direction.
Note that your PRCS2 features spindle lock function enabling you to turn screws manually.
7. The LED Light
Switch on the light by pressing the light button (4). Note that the battery's autonomy will be reduced when using the
light for a prolonged time.

8. Cleaning and Maintenance

1. Wipe the device regularly with a damp, lint-free cloth. Do not use alcohol or solvents. Dry thoroughly afterwards.
2. In order to maintain battery capacity, we recommend the battery to be completely discharged and recharged
again every two months.
3. Only store the device in a dry and moist-free environment with an ambient temperature not exceeding 50°C.
4. There are no user-serviceable parts.
5. Contact your dealer for spare parts if necessary.

9. Technical Specifications

Power Supply Charger
Power Screwdriver
Speed
Torque
Rotation
Chuck Capacity
Charging Time
Dimensions
Weight
For more info concerning this product, please visit our website www.perel.eu.
The information in this manual is subject to change without prior notice.
PRCS2_v2
max. 230VAC / 50Hz
7.2V
450 RPM
max. 5.0Nm
reversible
0.8 ~ 10mm
5 ~ 8 hours
210 x 180 x 55mm
875g
- 4 - PEREL