HP Autozubehor Smart 6 Manual Del Usuario página 9

Make sure correct polarity connection before plugging in the AC power.
• Position the RED terminal on the POSITIVE post connector
• Position the BLACK terminal on the NEGATIVE post connector
2. Connect the AC power cord with the AC power outlet.
• The Power LED indicator turns on after the connection.
• The charger will automatically select the right voltage according to the battery
voltage type and the corresponding LED indicator will turn on.
6V batteries
12V batteries
• The Error LED indicator will turn on for incorrect polarity/Faulty.
Reverse polarity hook up
Bad batteries cannot
be recharged
• Rated maximum 2A charging current for 6V batteries; the
2A current LED indicator will turn on.
• Rated maximum 4A charging current for 12V batteries in speed charge mode, and
also can choose 2A slow charge rate by press the Mode Button. Corresponding LED
indicator will turn on.
For 12V batteries:
Slow Charge
2A 4A
• harging status LED indicators to display the battery charging level. The charge LED
on when charging mode, while the FULL LED on when the battery is fully charged
and go to the maintenance mode.
CHARGE FULL
6V
12V
ON
6V
Flashing for 6V batteries
12V
Flashing for 12V batteries
Fast Charge
2A 4A
MODE
9/26
2A 4A
MODE