Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. SAFETY INSTRUCTIONS
This manual includes the important information
of installation and operation. Please install and
operate the light according to the instructions
strictly. And it must be power off when open the
light or before repair.
•
Please read the complete contents of this
manual(please keep this manual attach with
the light for any preview).
•
In order to make sure the correct and safety
installation, operation and maintenance, weel
know and follow to the instructions of manual
is necessary.
•
We will not take any resposibility to the light
damage, property loss or body unjure which
caused by the incorrect installation, operation
and maintenance.
Notice: The data which inside the manual may be
changed due to the continuous improvement, and
we´ll not take another notice. We eill keep the right to
any specification update during improvemente.
Warning
It should be change if the protection
screen, lens or UV screen got a
visible damage. The light should
keep away from fire and water to
avoid ir get into the light
Unpacking
Please check if the contents are complete after
unpacking. Then check if the light is undamage.
Please you can keep the original package and
return yo the factory if it´s damage.
Safety specifications
1. This device for indoor use only, the protection
grade is IP20.
2. Installing of the light must keep a distance with
any flammable objects by 5cm at least. The
distance between the light and the projected
objects must be no less than 1m.
3. Please never directly install the light on the
surface of the flammable objects.
4. The installation, operation and maintenance
must be manage by yhe qualified
professional. Make sure to operate it under
the instruction of the manual.
5. Make sure the work environment temperature
of the light maximum 40°C, and minimum
-20°C.
6. The temperature of the light surface will up to
60°C even under the normal cooling, so never
touch it by hand.
7. The light was designed by electric shock
protection type, and must connect to the
power supply system which well earthed.
Furthermore, the ground wire of the light
must connect to the ground wire of the power
supply system, ground wire interface of the
light must well connect with the light body (or
light must be well earthed).
8. Please check if the voltage is in accordance
with the rated power before installing.
9. Please never use the power cable which was
damage the insultation cover, meanwhile,
never put the power cable on any other wire.
Please pull out the power cable by handle the
plug when light is stop working or cleaning,
never pull out it roughly or handle the wire
directly.
10. The light doesn´t include any spare parts for
repair, please check if all the parts are well
installed and screws are drove tightly before
operating. it´s prohibited to use the light
when the cover is opened.
Notice: Please make sure it´s power off before any
installation, repair and clean.
| Tecshow Cosmo Go 12
English version
P. 3
Tabla de contenido
