Hand Blender - SEVERIN SM9617 Instrucciones De Uso

Ocultar thumbs Ver también para SM9617:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Familiarisation
1.
Operating button
2.
Drive unit
3.
Blender unit
4.
Blade
5.
Power cord with plug
6.
Hanging loop
Connection to the mains supply
Make sure that the supply voltage
corresponds to the voltage marked on the
rating label of the appliance. This product
complies with all relevant CE-labelling
directives.
Important safety instructions
Before the appliance is used, the main
body as well as any attachment fitted
should be checked thoroughly for any
defects. Should the appliance, for
instance, have been dropped onto a hard
surface, it must not be used any longer:
even invisible damage may have adverse
effects on the operational safety of the
appliance.
This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Do not allow the appliance or its power
cord to touch hot surfaces or to come
into contact with any heat sources.
Always switch the appliance off, wait
until the motor has come to a complete

Hand blender

standstill and remove the plug from the
wall socket, before attempting to clean
any attachments.
The blades are extremely sharp. To
prevent injuries, take special care when
handling these parts.
After switching off, always wait until the
motor has come to a complete standstill.
Do not touch any moving parts.
Always remove the plug from the wall
socket after use, and also
- in case of any malfunction
- during cleaning of the appliance.
During operation, the appliance should
be placed on a scratch-resistant surface.
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
This appliance is intended for domestic
use only and not for commercial
applications.
In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The address can be found in the
appendix to this manual.
Before using for the first time
- Before the appliance is used for the first
time, it must be thoroughly cleaned as
described in the section General Care
and Cleaning.
Short-time operation
The appliance is designed to process average
domestic quantities of food; it may be
operated without interruption for a
maximum of 1 minute, when it should be
allowed to cool down for approximately 5
minutes.
Operation
- Always use a suitable container for
operation. A tall container with a flat
6
Tabla de contenido
loading

Tabla de contenido