A. Start-up Operation
Fill the device only while the
power supply unit is disconnec
ted!
1. Insert batteries into the infra
red remote control (dia. 8).
2. Remove top part (dia. 1).
3. Fill with distilled water to the
maximum mark (100 ml)
(dia. 2).
4. Add 1 2 drops SOEHNLE
fragrance oil (dia. 3).
5. Replace top part while ensu
ring perfect fit (dia. 4).
6. Connect power supply unit
(dia. 5).
B. Setting up illumination and nebulization
a. On the diffuser (Image 7):
Operation
Push 1 x
Push 2 x
Push 3 x
Push 4 x
Push 5 x
Push 6 x
7. Place on a level surface
8. Switch on:
Illumination
Colour change on
One colour constant
One colour constant
Colour change on
Off
(dia. 6).
a. On the diffuser: The switch
is located on one of the base
feet. Place hand on device
and push device toward the
direction of the switch. Push
several times to switch device
off (dia. 7).
b. Using the remote control:
Push key
(dia. 9).
Note: If there is no water in
the device, the illumination
can only be switched on using
the
key Pushing the
key again stops the colour.
Fragrance
Device off
EN
On
On
Off
Off
On
9