FIBARO FGBHS-213 Guia De Inicio Rapido página 7

Description
FIBARO Single Switch (FGBHS-213) is designed to be installed in standard wall switch boxes
or anywhere else where it is necessary to control electric devices.
FIBARO Single Switch allows to control connected devices either via HomeKit technology (using
Bluetooth® low energy) or via a switch connected directly to it and is equipped with active
power and energy consumption metering functionality.
For more information about the device, like video guides,
parameters, technical manuals, and declarations visit our website:
manuals.fibaro.com/en/hk-switch
Warnings
DANGER OF ELECTROCUTION!
The Single Switch is designed to operate in home electrical installation. Faulty connection or use
may result in fire or electric shock.
All works on the device may be performed only by a qualified and licensed electrician.
Observe national regulations.
Even when the device is turned off, voltage may be present at its terminals. Any maintenance
introducing changes into the configuration of connections or the load must be always performed
with disconnected voltage (disable the fuse).
!
CAUTION!
Failure to observe recommendations included in the manual may cause risk to life and health
or malfunction of the device. The manufacturer, Fibar Group S.A. will not be held responsible for
any loss or damage resulting from not following instructions of the manuals.
Applied load and the device itself may be damaged if the values of applied load are inconsistent
with the technical specification!
Connect only in accordance with one of the diagrams. Incorrect connection may cause risk
to health, life or material damage.
The device is designed for installation in a wall switch box of depth not less than 60mm. The
switch box and electrical connectors must be compliant with the relevant national safety
standards.
Electrical system of the building must be protected with an overcurrent protection (fuse) with
a value not higher than 10A.
7
EN