Assembly Instructions; Features; Control Panel; Led Indicators - Duralast DL-2D Manual Del Usuario

• Wire size must be large enough for the AC ampere rating of charger, as specified:
Length of cord (feet)
AWG* size of cord
*AWG-American Wire Gauge

9. ASSEMBLY INSTRUCTIONS

9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.

10. FEATURES

11. CONTROL PANEL

LED INDICATORS

POWER (green) LED lit: The charger is connected to AC power.
CHARGING STATUS INDICATOR:
Yellow/orange LED lit: The charger is charging the battery.
Yellow/orange LED flashing: The charger is in abort mode.
Green LED pulsing: The battery is fully charged and the charger is in
maintain mode.
CLAMPS REVERSED (red) LED flashing: The connections are reversed.
BAD BATTERY (red) LED lit: The charger has detected a problem
with the battery. See Troubleshooting for more information.
NOTE: See Operating Instructions for a complete description of the charger modes.

12. OPERATING INSTRUCTIONS

IMPORTANT: Do not start the vehicle with the charger connected to the AC outlet,
or it may damage the charger and your vehicle.
NOTE: This charger is equipped with an auto-start feature. Current is supplied
to the battery clamps before a battery is connected, and the clamps may spark if
touched together.
25
18
6
5
4
1 2
3
50 100 150
18 18 16
7
1. Ring connectors
2. Battery clamps
3. Bad Battery LED
4. Power LED
5. Clamps Reversed LED
6. Charging Status LED
7. Hook attachment
• 8 •
(quick-connect)
(quick-connect)