CBX LUX Manual Del Usuario página 7

Assembling the seat unit: put the seat unit into the fittings on the frame either before or after
1
attaching the bumperbar. When the seat unit is fitted you can hear a „click" sound on both sides
of the frame. The seat unit can be used in both directions: forward and reward facing.
You can remove the seat unit by pushing the release buttons a on both sides.
2
Put your child in the pushchair. make sure the shoulder belts are positioned correctly over your
3
childs shoulders and put both plastic clamps in the buckle till you hear a „click". Press it left side
and right side to close the harness buckle.
By pressing both buttons on the left and right, you will release the harness buckle and can
open it again.
To adjust the belt system in length or shorten it tear the belt through the clip.
4
Assembling the bumperbar: place the bumperbar in position by pushing downwards in the
5
direction of the arrows. To remove the bumperbar, press the button b and remove your child
with ease.
Fitting the hood: the hood comes ready to use in the box. Attach it by putting the hood clasps on
6
to the frame and pressing them together.
To remove it, open the zipper and push the hood clasps upwards away from the frame.
The hood is multifunctional. It can be unzipped and opened completely to cover a wider area.
7
There is a viewing window in the hood to allow you to see your child.
The seat unit backrest can be adjusted to three different positions. To adjust the backrest, press
8
the button to move it to the desired position.
Important — Keep these instructions for future reference.
Compatible with BIMISI & LEOTIE
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
INSTRUCTIONS
EN
7