Technical Data - Surtek MS516A Manual De Usuario

Cutter setting standards:
- Be sure to wear safety gloves.
Before filling:
- Make sure the saw chain is held securely.
- Make sure the engine is stopped
- Use a round file of proper size for the chain.
Chain type: 91 VG
File size: 5/32" (4,0 mm)
Place the file on the cutter and push straight
forward. Keep the file position as illustrated.
After each cutter has been filed, check the
depth gauge and file to the proper lever as il-
lustrated.
Appropiate
gauge checker
Depth gauge
standard
NOTE: Be sure to round off the front edge
to reduce the chance of kickback or tie-strap
breakage. Make sure every cutter has the same
length and eager angles as illustrated.
Cutter length
Side plate angle
GUIDE BAR
- Reverse the bar occasionally to prevent par-
tial wear.
- The bar rail should always be square. Check
for wear of the bar rail. Apply a ruler to the bar
and the outside of a cutter. If a gap is observed
between them, the rail is normal. Otherwise,
Make the
shoulder
round
Filling angle
Top plate cutting
angle
E N G L I S H •
the bar rail is worn. Such a bar needs to be cor-
rected or replaced.
Ruler
Gap
Chain tilts

TECHNICAL DATA

MS516A
DISPLACEMENT
FUEL MIXTURE
FUEL TANK CAPACITY
CHAIN OIL
OIL TANK CAPACITY
SPARK PLUG
OIL FEEDING SYSTEM
CUTTING HEAD
TYPE OF BAR
SIZE
CHAIN PITCH
MS618
DISPLACEMENT
FUEL MIXTURE
FUEL TANK CAPACITY
CHAIN OIL
OIL TANK CAPACITY
SPARK PLUG
OIL FEEDING SYSTEM
CUTTING HEAD
TYPE OF BAR
SIZE
CHAIN PITCH
MS620
DISPLACEMENT
FUEL MIXTURE
FUEL TANK CAPACITY
CHAIN OIL
OIL TANK CAPACITY
SPARK PLUG
OIL FEEDING SYSTEM
CUTTING HEAD
TYPE OF BAR
SIZE
CHAIN PITCH
MS722
DISPLACEMENT
FUEL MIXTURE
FUEL TANK CAPACITY
CHAIN OIL
OIL TANK CAPACITY
SPARK PLUG
OIL FEEDING SYSTEM
CUTTING HEAD
TYPE OF BAR
SIZE
CHAIN PITCH
U se r ' s m an ua l
No gap
38 cc
25:1
310 ml
Motor oil SAE# 10W-30
210 ml
M7
Automatic pump
Sproket nose
16" (406 mm)
0.325"
45 cc
25:1
550 ml
Motor oil SAE# 10W-30
260 ml
M7
Automatic pump
Sproket nose
18" (457 mm)
0.325"
45 cc
25:1
550 ml
Motor oil SAE# 10W-30
260 ml
M7
Automatic pump
Sproket nose
20" (508 mm)
0.325"
51 cc
25:1
550 ml
Motor oil SAE# 10W-30
260 ml
M7
Automatic pump
Sproket nose
22" (558,8 mm)
0.325"
19