Fracarro SIG7340 Instrucciones De Uso página 29

5.2.8 HEADEND SETUP AND KTP EMULATION MENU
Navigation in the headend
programming menus
HEADEND
SETUP
On Screen Display settings
visualization
Automatic
acknowledgement of the
headend connected to
the TPE
Export the headend
configuration to another one
Restore the module
defaults setting
Restart the module
Emulation of the KTP
programmer
KTP
EMULATION
Confirm the settings by pressing the
*
The function copies the following parameters: TS input, LNB, DiSEqC, IF Freq., Symbol rate, TS output,
Video format, Audio type, Audio level, Standard, CAPMT update, CAPMT management, CAPMT resize.
The settings relevant to the channel list will not be copied.
To update the firmware of the SIG7340 modules, refer to the download section of our Internet web site www.
fracarro.it.
NAVIGATION
NAVIGATION OSD
HEADEND SCAN
COPY
FACTORY SETUP
SET ADDRESS
RESET MODULE
KTP Emulation
KTP
EMULATION
pressing the S key after the modules programmation.
6. FIRMWARE UPDATING INSTRUCTIONS
Refer to the SIG7340 general
SIG7340
programming menu
Refer to the SIG7340 general
SIG7340
programming menu
Automatic search of the headend or
the connected device. After searching,
the main menu can be seen from the
Search module....
Paste
Copy
SIG7340
SIG7340
All
SIG7340
modules
Address not valid
All
SIG7340
modules
V=OUTPUT
key; save the settings by
29
NAVIGATION function
*
YES = V NO = X
Yes=V NO=X
Read-only
Yes=V NO=X
The function is not
available for the
programming of the
SIG7340 module