Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Link together the front and back panel. In this case you will have to connect following connector pair marked with nr.3:J104-
WI101.
MRP2 MODULE
CLOCK PROGRAMMING INSTRUCTIONS
After connecting the clock for the first time, press the
programmable switch is now ready to operate.
Setting the current time and weekday
1.
First of all, you should reset the device by pressing the "R" button.
""
2.
Keep the
button pressed during the entire procedure.
3.
If you are currently in Summer period, press the "±1h" button once.
4.
Set the current time using the "h+" (hours+) and "m+" (minutes+) buttons.
5.
With the "DAY" button, select the current weekday. (1 = Monday .. 7 = Sunday)
""
6.
Release the
Command programming
Each channel has 42 memory positions. Each command (Switch ON/ Switch OFF) occupies one of these memory positions.
1.
Press the "Prog" Button repeatedly until the first empty memory position appears (shown in the display as "--:--")
2.
Select either a switch ON
MRP2
2/7
3
button.
""
or switch OFF "
"R"
button with a pencil or similar object. The display should show 00:00. The
O
" command for channel 1 or channel 2 with the corresponding "
www.audiovias.com
2
1
" button.
50.0048.0200
Tabla de contenido
