Precisa 360 EP Manual De Instrucciones página 8

■ 2 Discover the Capabilities of the New Series 360 EP
rd
2.3 3 Step
Put the container in which you want to count the screws on the weighing pan and tare the balance:
• Press «0/T»
At first, put exactly 5 screws into the container.
• Press {5 PCS}
The balance takes the quantity showing it in the primary display, while the weight is visible in the secondary
F
display. There appears a rotate-symbol on its right end which indicates the possibility of a content in-
terchange between the primary and the secondary display by pressing «ROTATE».
In the Info Area the balance is showing under "PcsWgt=" the calculated weight of one screw. Each time the
number of pieces increases for at least three, the balance, beeing stable, re-calculates the reference weight
of one piece. During this procedure appears a circle "O" on the left end of the primary display. As soon as
it disappears, the new, just calculated piece weight is displayed in its info field. In order to allow the balance
to count error-free, it is, at every first weighing-in, advisable to pause for some seconds each time the
number of pieces doubles the last calculated one (thus in our case at 10, 20, 40 and 80).
As soon as the first lot of 130 pcs., with the graphic and acoustic aid of the CheckWeigher, is weighed-in,
you may store it:
• Press {STO 1}
The function "STO 1" changes to "STO 2", "STO 3" (observe both info fields on the left side of the info ar-
ea). It stores and counts every weighing-in. Once the last weighing-in is stored, in our case the 15th, it
changes to "ENDED 15".
All statistic data are continuously refreshed and available during the entire procedure, as well individually dis-
played in the info area (remember the hold «ROTATE» -key for running over the info pages), as recallable
with {Show Stat.} in an info window.
By pressing {Clr Stat.} you may anytime clear all statistic data and restart your weighing-in with the existing
procedure settings.
5