Location And Function Of Parts - Sony IFB-40 Manual De Instrucciones

The IFB-40 signal interface board is a PC board to be mounted on the
PC-3000 to connect a switcher's REMOTE 1 connector to that of a
projector using a SIC-M cable or CCQ cable.

Location and Function of Parts

1
REMOTE 1
IN
1 Indicator (Red)
When the IFB-40 is mounted on a projector
Lights up when it is selected.
When the IFB-40 is mounted on a switcher
Lights up usually when a switcher functions.
2 REMOTE 1 IN/OUT connector (14-pin multi connector)
IN connector: Connect to the switcher's REMOTE 1 connector
when the PC board is mounted on a projector. When connecting
two projectors, connect to the REMOTE 1 OUT connector of the
IFB-40 mounted on another projector.
OUT connector: Connect to the REMOTE 1 IN connector of the
IFB-40 mounted on a projector or a switcher.
3 MODE selector
Turn the control switch of the MODE selector to the appropriate
position according to the length of the cable connecting the OUT of
the REMOTE 1 connector.
Cable length up to 2 m
Type of cable
SIC-M-1
CCQ-2BRS
Position
2
up to 10 m
SIC-M-5
CCQ-5BRS
CCQ-10BRS SIC-M-25
1 2
3
M O D E
O U T
up to 25 m up to 50 m
SIC-M-15 SIC-M-50
CCQ-25BRS CCQ-50BRS
3 4
IFB-40.3-858-498-03 (1)
9