1.3
Technical Data
Ø
Model
Needle
mm (in)
MEF-38
38 (1,5)
MEF
50
50 (2)
-
Supply Voltage: 200/240 V., 50/60 Hz.
110/120 V., 50/60 Hz.
Operation temperature: of -20° C at +55° C, correspon ding to the class 4K4H.
Note: Both models incorporate thermal protection
1.4
General Characteristics
The Vibrator will be used by personnel trained for this job, it will only be used in specific jobs for
which it has been technically developed, after having read the instructions contained in this manual
and which must be fellowed correctly.
The manufacturer or authorised distributor must be consulted about any doubts.
The manufacturer Industrias Technoflex S.A., will not accept any responsibility derived from
incorrect installation, manipulation, or misuse of the vibrator.
1.5
Safety at work
The HIGH FREQUENCY Electronic Vibrators SILVA- model fulfils the E.C. regulation of safety at
work, low voltage and vibration in portable machines or hand driven, as well as ISO 6081 regulation,
regarding noise at the place of work. However the use of hearing protection and rubber boots during
the vibrating time.
The manufacturer will not accept responsibilities for accidents if they derive from structure
modification.
The rules demand a perfect connection to a general GROUND. NOT having this connection or
having it wrongly installed excuses the manufacturer of any responsibility.
In the case of having to open the control box which protects the electronics the operator should wait
15 minutes after disconnecting the electricity supply.
INGLÉS
Length
Lgt. Cover
Nedle
Lgt. Cable
mm (in)
ft.
360 (14)
4 + 5
333 (13)
4 + 5
OPERATION
Centrifugal
Vibrations
Force
Per minute
N.
13.000
1.500
13.000
2.700
Working Tension: 200/240 V., III, 200 Hz.
Nominal
Weight
Width
Current
lbs.
1,3
37,5
1,4
40
110/120 V., III, 200 Hz.
1B
A.
2,5
3,5
1B-4