Tabla de contenido
MD GUIDE MESSAGES
BLANK
DISC
Nothing is recorded on the disc.
Can't
COPY
Digital recording is prohibited by the SCMS
standard.
+ See "About the Serial Copy
Management
System (SCMS)" on
page 22.
Can't
EDIT
Tracks are too short to be combined.
+ See "The limitations of MD on page 76.
The combine
function
was used while
playing the first track.
The divide
function
was used at the
beginmng of a track.
The
combine
function
was
used
to
combine
a track recorded
in monaural
with a track recorded in stereo.
CAUTION
!
Recording
cannot
be continued
by
damage of the disc.
The unit operates abnormally.
+ Reset the unit pressing the RESET
button on the bottom of the unit.
DISC
ERROR
The disc is damaged by scratches.
The TOC data is not registered correctly.
DISC
FULL
There is not enough time remaining
on
the disc to record.
There are too many tracks to be recorded.
HOLD
The HOLD switch is set to HOLD position.
NO DISC
No disc is inside the unit.
No Signal
Playback of the connected
unit has not
started yet.
Opbcal digital
cable
is not connected
completely.
LOW BATT
The batteries wear out.
OPEN
The disc holder IS not closed.
PB DISC
Recording
is attempted
on the disc for
playback only.
PROTECTED
The disc is record-protected.
TEMP
OVER
!
The ambient temperature
is too high or
too low.
TOC FULL
There are too many tracks or emphasis
data to be recorded or edited.
68
Tabla de contenido
