Initial Start-Up - HSM Pure 630 Instrucciones De Servicio

english

4 Initial start-up

WARNING
Dangerous mains voltage!
Improper handling of the machine can lead
to an electric shock.
• Only use the machine in a dry room
indoors. Never operate the machine in
damp rooms or in the rain.
• Keep the machine, the plug and cable
away from open fi re and hot surfaces.
The ventilation slots must not be blocked
or covered and there must be at least
5 cm space between the shredder and
any wall or furniture.
• Make sure that the power plug is easily
accessible.
• Before you insert the power plug, make
sure that the voltage and frequency
of your power supply comply with the
information on the name plate.
• Connect the power cable provided to the
back of the document shredder and plug
the power supply into a properly installed
socket.
12
5 Operation
Switching on the shredder
• Set mains switch at rear of paper shredder
to "I".
• Press the operation button.
 The "Ready for operation" indicator
lights up.
Shredding paper
• Feed the paper into the centre of the
paper slot. The light barrier starts the cut-
ting unit automatically. Therefore, with thin
paper strips, make sure the light barrier
detects them.
 Three seconds after the light barrier in the
paper feed opening is free again, the cut-
ting unit is switched off automatically and
the shredder switches to standby.
HSM Pure 630
11/2015