Security Instructions When Using With Hot Liquids; Using The Plunger; Cleaning And Maintenance - Springlane Hanno Manual De Instrucciones

SECURITY INSTRUCTIONS WHEN
USING WITH HOT LIQUIDS
• Be careful when adding and mixing hot ingredients or removing the
lid from the mixer container. Steam might escape unexpectedly.
Never use this device to process boiling liquids.
• Start operating the mixer at low speed and slowly raise the speed
until you reach the desired speed.
• Always firmly close the lid included in delivery to prevent contents,
hot liquids, and hot steam from escaping.

USING THE PLUNGER

Remove the measuring cup from the lid and hold the plunger to the lid opening.
The plunger is only intended to press ingredients towards the blades.

CLEANING AND MAINTENANCE

The container should be cleaned and dried as follows after each use. Not (properly)
cleaning the high-performance mixer might impair its functionality.
1. Before cleaning, switch off the device and disconnect the plug from the
connector.
2. Never dunk the housing of the motor base into water.
3. Do not use scratching or abrasive cleaning agents.
4. Only wipe off the housing with a moist cloth.
5. Do not attempt to remove the cutting blades from the mixer container in order
to clean them. This might cause the mixer container to leak.
6. Remove the container from the motor base and remove any remaining food-
stuffs from the container. Pay attention to not injure yourself on the blades
when cleaning.
7. Clean the container by filling it with 800 ml of warm water and several drops
of mild cleaning agent. Close the container with the lid and set the switch to
33