Before First Use - Korona 20667 Manual De Instrucciones

Before First Use

• Remove all packaging material and check whether the
appliance is undamaged and complete.
• Fully unwind the power cord (9) and make sure that the
power cord (9) is clamped into the cable guide (10) (rear
side).
• Place the appliance on an even and heat resistant surface.
Do not place it on top of a metal surface.
• Connect the appliance to a properly installed wall socket
and boil 4-5 kettles of water using fresh water with each
boiling cycle. Do not use this water but pour it away.
Warning: Plastic bags are a danger to toddlers and
babies, therefore keep them away to avoid suffocation.
Operation
Your appliance is fitted (inside the spout) with a scale
filter that prevents scale particles ending up in your
beverage.
1. Open the lid (2) and hold the kettle (4) in an upright position
to fill it with water. Make sure to fill in the MIN amount of
water (0.5L) to avoid overheating.
Info: The kettle can also be filled with water when the lid
(2) is closed by filling it through the spout (3).
2. Close the lid (2).
3. Place the kettle (4) onto the base (8) and make sure it
properly fits onto the contact unit.
4. connect it to the mains and switch on the water kettle by
pressing the On/Off switch (7). The integrated indicator
light lights up.
Instruction Manual ENGLISH
19