Motor Protection; Technical Data - Olympia PS 18 CD Instrucciones De Uso

Ocultar thumbs

Contenido

página de 52

/ 52
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

It is recommended not to fill the paper collection basket up to the cutting unit. This

prevents cut material becoming jammed in the cutting unit.

Empty the paper collection basket at regular intervals.

If too much paper is inserted in the cutting unit, it will cause a jam.

Proceed as follows:

Push the sliding switch to the Paper REV position.

The cutting unit runs backwards and pushes the excess paper back.

Reduce the quantity and slide the switch to AUTO again. The cutting unit runs forward

again and the residue remaining is shredded.

If the backwards and forwards movement does not remedy the jam, pull out the mains

plug and remove the remaining manually from the cutting unit.

The motor switches off automatically in the event of overloading. Pull out the mains plug

from the socket and allow the motor to cool down to room temperature. Plug the mains

cable back in and then continue operation.

Caution: maintenance work may only be performed when the mains plug is

pulled out.

Clean the housing with a slightly moist cloth.

Do not use any aggressive cleaning agents. Never use any chemicals (e.g. cleaning

solvent, alcohol) to clean the housing.

To ensure your shredder enjoys a long working life, we recommend to clear residual

material from the cutting units at regular intervals and apply special oil for paper

shredders to the cutting unit. You can purchase a special CFC-free oil from your

specialist retailer or directly from our Service Center in Hattingen. This will extend the

service life of the device.

Attention: It is forbidden to use oil spray bottles containing CFC!

Model:

Power supply:

Cutting width of the paper slot:

Cutting width of the CD slot:

Cutting power:

Security level:

Max. power consumption:

Size (W x H x D):

Weight:

Operating cycle paper:

Operating cycle CD:

Clearing a jam