Preparation; Installation Instructions - Twin-Star International 34HF601GRA Manual De Instrucciones

PREPARATION

Before beginning installation of product make sure all parts are present. Compare parts with
package contents list and drawing above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly (not included): Phillips screwdriver, Drill, Hammer, Level
WARNING! Do not use this electric fireplace if any part has
been under water. Immediately call a qualified service
technician to inspect and to replace any part of the electrical
system if necessary. Keep plastic wrapping away from children.
• Open the packaging carefully and remove the foam.
• Remove and discard the plastic bag.
• Be responsible when handling the packing materials.
• Keep the original packaging for future transport and/or storage.
• Check that all accessories are removed before you discard the packing.
INSTALLING YOUR ELECTRIC FIREPLACE
Your new electric fireplace may be installed virtually anywhere in your home. However, when choosing a
location be sure to follow the general instructions included. For best results install out of direct sunlight.
Power supply service must be either completed or placed within the electric fireplace prior to finishing to
avoid reconstruction.
WARNING: Keep drapery and other furnishings
at least 3 ft / 91.4 cm from the front and sides of
the electric fireplace.
Clearance to combustibles
Sides.............................................. 2 in / 5 cm
Floor .............................................. 2 in / 5 cm
Top ................................................. 2 in / 5 cm
Back............................................... 0 in / 0 cm
WALL MOUNTING INSTALLATION INSTRUCTIONS
1. Remove mounting bracket (A) from back of
Fireplace (B) by removing the two screws at the
top back of the unit (Fig.1).
5 cm
min.
2 in
FLOOR
Fig. 1
6
min.
min. 5 cm
2 in
5 cm
2 in