Dexter 800AG2-125.5 Manual De Instrucciones página 209

FR
8. OPERATING INSTRUCTIONS / DRAWINGS
ES
Switch ON/OFF
PT
Switch on: Push the safety interlock forwards meanwhile clenching the paddle
to turn on the machine.Then keep hold it in position for continuous operation.
IT
Switch o : Loosen the paddle and turn o the machine,go loosen the safety
interlock to lock witch at OFF position.
EL
WARNING: Do not cover exhaust vents when the tool is in use. This may cause
damage to the motor and reduce the e ciency of the tool.
PL
Abrasive operation
RU
When equipped with abrasive wheel and guard, for the best work results hold
the grinder at 15~20° to the work piece.
UA
RO
EN
Overload
The motor of your right angle grinding machine may be damaged when
overloaded. This results from excessive working pressure over a prolonged
period. Therefore you should not try to accelerate your working speed by
increasing pressure on your machine. The abrasive disks work more e ciently if
only slight pressure is exerted on the grinding machine, thus avoiding a drop in
the grinding speed.
9. MAINTENANCE / CLEANING /
LUBRICATION / STORAGE
15~20°
209