Unit controls
A few simple controls make it easy to turn Slice ON and OFF, select an input
source, focus the screen image and adjust the speaker volume – directly on the
unit itself.
ON/OFF
Press this button to turn Slice ON or OFF.
Select
Press this button to select the input source. There are four options:
1.
DOCK — For docking an iPhone/iPod/iPad. DOCK is the default setting.
2.
HDMI — For connecting to HDMI sources, such as a DVR or DVD player.
3.
VGA — For connecting to a personal computer.
4.
AV — For connecting to devices via a red/yellow/white composite cable or
an undocked 30-pin connector (sold separately).
Your last input selection will be used when powering up from standby mode.
"No Signal" will be displayed if the selected input source is not connected
and active.
Focus
Gently move the slider, located on the side of the flipped-out projector, forward and
backward to focus the projected image.
Volume
Press the
decrease Slice's volume. A volume bar will appear on-screen to display the
selected level. Audio level will reset only when the power from the AC/DC adapter is
disconnected. If Slice is simply turned OFF, audio levels will stay the same when it is
turned back ON.
Chapter 2: Getting started
button to increase Slice's volume. Press the
button to
11