Getting Started; General Usage - SKF TKRS 11 Instrucciones De Uso

3. Getting started:

• Unscrew the battery compartment screw.
• Insert all three AA batteries respecting the polarity.
• Close the lid and tighten the screw.
• Start the instrument by pressing the red ON/OFF button.
• The device will start to lash straightaway.
For this reason, do not direct it at people or animals.
The device will lash at the frequency that was set most recently.
Please follow the steps below when setting up the device:
Direct the device at a moving object and turn the scrolling wheel to adjust the
lashing rate.
The display shows the selected lash frequency in the unit that was set most
recently (Hz or FPM).
• If the lash frequency coincides with the frequency of the motion, a static
image appears.

4. General usage

The stroboscope offers ive different menus to operate the stroboscope.
By pressing the wheel (button 4) the stroboscope moves from one menu to
the next.
Symbol Name
FPM
Phase
Brightness
Torch
Setting
10 EN
Description
Main operating menu to set the lash rate
(FPM – lash per minute).
Menu to change the phase of the lash. While
keeping the same lash rate, adjusting the phase
allows to move the frozen image.
Menu to adjust the brightness / duration of the
lash.
Menu to use the stroboscope as a torch light.
Menu to change the settings of the stroboscope
to the preferences of the operator.