Quick Start; Charging The Battery; Advanced Uses - Volfoni ACTIVEYES PRO Manual De Usuario

4. QUICK START

To watch active displays using your ActivEyes System in
universal infra-red 3D mode :
1. Using the connection cable, plug the ActivEyes Pro to the
ActivMe Pro, and place the glasses on your head.
2. Check that the "function" selector on the ActivMe Pro is on
"1".
3. Switch the power on. The glasses should blink once each
eye to signal that the system is up and running.
4. Hold the ActivMe Pro driver facing your 3D display or IR
source and press the "Action" button for two seconds. The
LED will be solid green while the ActivMe Pro scans the IR
signal. The last synchronized 3D display signal will be
automatically recognized without pressing the « Action »
button.
5. As soon as the IR signal is identified and interpreted, the
glasses go into 3D mode. You can now attach the ActivMe
Pro to the front of your clothing or attach to the lanyard,
making sure that the IR window is not obscured.
To watch passive displays :
(for VPAE-0100-H models only)
Simply wear your ActivEyes Pro. There's no need to plug or
power on the ActivMe Pro.

5. CHARGING THE BATTERY

To charge the ActivMe Pro, plug it in using the Micro-USB
cable to any 5V USB power source (or computer). The LED
should go red until the battery is fully charged, then the LED
goes green, typically after 2.5 hours. The battery is estimated
to last 30 hours before needing a recharge. Your ActivMe can
operate while charging.

6. ADVANCED USES

Resetting the IR protocol
Your ActivMe Pro receiver records the brand and model of
your 3DTV for faster 3D decoding. When switching to a
different IR sync source, you need to reset the IR search. Press
the "Action" button for 2 seconds, the LED will go solid green.
Wait for the receiver to identify the IR signal and your glasses
will automatically switch to the appropriate 3D mode.
A/B View selection
You can select various viewing modes by pressing on the
"action" button. One short press will shift the glasses in 2D
mode, showing the
left view in both eyes. Another press will select
the right view. This allows you to share a single screen between two
players in "Dual View" mode on selected video games. A third press
brings back the normal 3D mode.
4.