Operating Manual; Important Safety Information; Prior To Use; Safety Guidelines - WMF STELIO Instrucciones De Uso

Ocultar thumbs Ver también para STELIO:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12

Operating Manual

Important Safety Information

▪ Devices can be used by persons with limited physical, sensory or men-
tal capabilities, and persons lacking experience and/or lacking know-
ledge, if they are supervised or have received instructions regarding
how the device is to be used safely and have understood the resulting
hazards.
▪ This device may not be used by children. The device and its connecting
cable are to be kept away from children.
▪ Children should be supervised to ensure that they do not play with
the device.
▪ The device is always to be disconnected from the mains by discon-
necting the power plug when there is no supervision present or for a
fault during operation, prior to assembly, disassembly or cleaning.
▪ If the supply cable of this device is damaged, the manufacturer, his
customer service or a similarly qualified person must replace it in
order to avoid hazards.
▪ Use caution when handling the sharp cuttings blades, when emptying
the jar and when cleaning.
▪ Clean the glass jar after each use.

Prior to Use

The mixer may only be used for its intended purpose according to these operating instructions.
Therefore, carefully read the operating instructions prior to start-up. They provide instructions for use,
cleaning and care of the device. We are not responsible for any damage if the instructions are not
observed. Keep the operating instructions in a safe place and pass them on to the subsequent user
together with the device. Also note the warranty information at the end of the operating instructions.
The device is not intended for commercial use, but rather only for the preparation of food in common
household amounts.
Observe the safety instructions during use.
Technical Data
Nominal voltage:
220 – 240 V 50-60 Hz
Power consumption:
600 W
Short-time operation:
2 min
Protection class:
I
8

Safety Guidelines

▪ Only connect the device to a properly installed, isolated ground receptacle. The cable and connec-
tor must be dry.
▪ Do not pull the connection cable over sharp edges or clamp it, do not let it hang down and protect
it from heat and oil.
▪ Do not place the device on hot surfaces, such as hot plates, etc., and do not operate near open
flames.
▪ Never disconnect the mains plug from the socket by the cord or with wet hands.
▪ Do not switch on the device with an empty glass jar.
▪ Always operate the device with a closed lid. Always wait for the blades to come to a stand-
still before removing the lid or the glass jar.
▪ Never handle objects in the glass jar while the device is running.
▪ Do not reach into the jar before the power plug has been unplugged.
▪ Always place the selector switch on the off position 0 before removing the glass jar.
▪ Attention! There is a risk of scalding when processing hot food. In extreme cases, the glass jar
could be damaged. Only food with a maximum temperature of 60°C may be processed. In this case,
do not fill the jar more than halfway and firmly press the lid on the jar during operation.
▪ Switch off the appliance and disconnect from supply before changing accessories or approaching
parts that move in use.
▪ Do not operate the device or immediately unplug it if:
the device or power cable is damaged
there is suspicion of a defect or something similar after it has fallen.
In these cases, send the device to be repaired.
▪ Do not submerge the propulsion unit in water.
▪ No liability is assumed for any damage in cases of misuse, improper operation or non-professional
repair. Warranty payments are also excluded in such cases. Improper use can result in defects on
the product or injuries.
▪ The device is not intended for commercial use.
▪ Only use original accessories. Please follow the instruction when using accessories which were not
provided with the device.

Device Configuration

1
Closing cap
2
Lid
3
Glass jar
4
Sealing ring
5
Blade assembly
6
Screwed ring
7
Propulsion unit
8
Selector switch
9
Tabla de contenido
loading

Tabla de contenido