Operation - Urrea 2363E Manual De Usuario

DC CONNECTION
1. Connect the plug provided with the DC bat-
tery cable to the socket present at the back of
the pump body.
2. Connect the Crocodile Clips in red with the
+ve terminal and the one in black with the –ve
terminal of the battery.
3. Turn the toggle switch to 'ON' position to
start the pump.
WARNING: The pump must not be used
with 24V DC supply to avoid any damage or
accidents.

OPERATION

1. Pull out the Nozzle from the Nozzle Holster.
2. Place the Nozzle into the receiving container
to transfer the liquid.
E N G L I S H •
3. Switch On the Toggle switch (Up) and pull
the Nozzle Trigger.
4. After Dispensing Switch Off the Toggle
switch (Down) and lift the Nozzle upward al-
lowing all the liquid in the line to flow back
into the Drum.
5. Place the Nozzle back into the Holster to pre-
vent any damage to the Hose or to the Nozzle.
HOW TO EXTEND TELESCOPIC SUCTION TUBE ?
1. Rotate the joint nut anti clockwise and then
pull the strainer end of the suction tube away
from the bung.
U ser's manual
11