Best Buy Cyberbook E-Touch Manual De Usuario página 37

User Manual
/ / / / / / / /
13. Green LED. This lights momentarily when the unit is starting. The
screen is blank when the Reader is switched off. Use any key to reactivate
the Reader. Tapping on the touch screen does not reactive the Reader.
14. Red LED. Indicated that the Reader is connected to an AC outlet or to
a computer via USB. The battery is being charged. It goes off when char-
ging is complete.
15. Power on switch and key lock
16. Reset button. Resets the Reader if no operation is possible. The Reset
button is located on the backside of the Reader.
2. Turning on/off the Reader
Slide and hold the Power switch for 2 seconds to turn on the Reader. Make
sure to turn on the Reader before connecting to your computer.
Slide and hold the Power switch again to turn off the Reader.
Notes
When turning on the Reading the Reader starts to scan all books in the Reader.
Depending on the total number of books stored on the internal flash memory
and external Micro SD (TF) card, the scanning process can take several minutes.
The scanning process is necessary for the sorting operations and displaying the
book cover in the book list.
The scanning operation starts automatically in the following cases:
· After switching on the device.
· An external Micro SD (TF) card has been removed or inserted.
· A book of supported formats has been downloaded and you exit the browse.
· After disconnecting the Reader from the USB port of a computer.
37