1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
Keep the device away from children and unauthorised users.
Risk of electroshock when opening the cover. Touching live wires can cause life-threatening
electroshocks. Do not open the housing yourself. Have the device repaired by qualified personnel.
Note: consult the wiring diagram on www.hqpower.com.
Always disconnect mains power when the device is not in use or when servicing or maintenance
activities are performed. Handle the power cord by the plug only.
Do not use the PSS1303 with devices requiring an input current > 3A.
Do not use the PSS1306 with devices requiring an input current > 6A.
Do not use the PSS1310 with devices requiring an input current > 10A.
Do not use the PSS1320 with devices requiring an input current > 20A.
Max.
PSS1320: 22A for 1 min and cool down during 10 min / 20A for 30 min and cool down during 10
load
min / 15A for 2h and cool down for 10 min / 8A continuously.
3. General Guidelines
Refer to the Velleman
Indoor use only. Keep this device away form rain, moisture, splashing and dripping
liquids. Never put object filled with liquid on top.
Keep this device away from dust and extreme heat. Make sure the ventilation openings are
clear at all times. For sufficient air circulation, leave at least 1" (±2.5 cm) in front of the
openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Select a location where the working of the heat sink will not be impeded by walls or large objects.
•
Let the device cool for 10 minutes for every half hour of use at full power.
•
Familiarise yourself with the functions of the device before actually using it.
•
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
•
the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
•
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
•
dealer will not accept responsibility for any ensuing defects or problems.
4. Operation
1. Insert the AC power plug in a 230VAC/50Hz-outlet.
2. Connect the power cord of a device with the appropriate input voltage to the output binding posts on
the front panel. The red positive (+) terminal and black negative (-) terminal are indicated on the front
panel. Mind the polarity: reversal of polarity may damage the device.
3. Put the ON/OFF switch on the front panel in the "ON"-position. The light in the switch will come on.
03.09.2010
USER MANUAL
®
Service and Quality Warranty on the final pages of this manual.
PSS13xx
2
©Velleman nv