Tabla de contenido
Idiomas disponibles
Idiomas disponibles
14. OTHER ABNORMAL SITUATIONS
•
Heater Overheat Flashing and showing this
status, means heater is too hot or thermo sen-
sor is cut;
•
No Heating Flashing and showing this status,
means unable heating;
•
No Fluid Flashing and showing this status,
means fluid runs out or pumping no fluid; at
this moment, speed of the fan will reduce to
minimum, and pump will stop working.
15. MAINTENANCE
Before doing maintenance, please make sure that
the power is cut, the power cord is unplugged, and
the machine itself has cooled down. The mainte-
nance must be done by qualified person.
1. The fluid is not allowed to get dirty. Be sure to
always clean or replace the caps on the tank
(Replace the caps on the tank directly. This kit
includes quick connector, cap, pipe and filter)
and tight the cover of the faze machine tank
immediately after filling.
2. Prolonged use, the nozzle may be clogging by
impurities, periodically use tools to clean the
nozzles, keep the nozzle unobstructed.
3. Prolonged use, flight case side air filter can
accumulate dust, periodically remove the flight
If fluid is run out, full the tank with fluid and press
START/STOP to reset.
Very Important: Please do not pull out the power
suddenly when the machine is in normal smoke
condition.
case side cover and remove the air filter to do
the cleaning, after cleaning, be sure to dry the
air filter after replacing the flight case again.
Be sure to dry the air filter
after replacing the flight
case again!
4. Prolonged use, sponge inside the vent may
accumulate oil, periodically cleaned out or
replaced with a new sponge.
P. 15
English version
- Neo Steam F1400
Tabla de contenido
