InMotion SCV R1EX Serie Manual De Usuario página 110

Continuing to accelerate and ride against the Handlebar could cause injury or damage from loss of control, collisions, and falls.
The speed at which the handlebar pushes back depends on a variety of factors including set-up speed limiter, terrain, payload,
and battery condition. The below list shows conditions that will trigger the speed limiter.
Continuous climbing
Riding on bumpy roads
The moment it powers on
Low battery
3.7.2.
Safe Stop
If the INMOTION SCV detects severe faults or restrictions (such as being
outside the specified riding range), it performs a Safety Shutdown.
When a Safety Shutdown occurs, the INMOTION SCV automatically reduces
its speed, gives the Shaft Shake Warning (shakes the handlebar and makes
growling noises), and emits a warning tone.
You have approximately 14 seconds from the start of a Safety Shutdown to
come to a controlled stop and step off. After 14 seconds, the INMOTION SCV
will immediately shut down when the Wheels reach zero speed.
Motor temperature
High Circuit temperature
Battery temperature too high or too low
Continuous descending
110