Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Anschluss und Inbetriebnahme • Connection and start-up • Connexion et mise en service • Conexión y puesta en servicio • Collegamento e
messa in funzione • Aansluiting en inbedrijfstelling • Podłączenie i uruchomienie • Elektrik bağlantısının yapılması ve işletime alınması
You can additionally mount to your awning other Jarolift® hand and wall transmitters. You can program them by means of the copy function
as follows:
Copying the radio code
1. Press simultaneously the UP and DOWN button on the already
programmed transmitter. Press then 8 times the STOPP button on this
transmitter. The motor will vibrate for confirmation.
Transmitter 1
1
Simultaneously press
the Up / Down button
2. Press now within 5 seconds the button UP and DOWN simulta-
neously and then briefly the STOPP button on the new transmitter
where you want to copy the code. The motor will vibrate for confir-
mation. The code will now be copied on the new transmitter.
Transmitter 2
1
Simultaneously press
the Up / Down button
8
(motor vibrates)
Then press 8 times
the Stopp button
1
(motor vibrates)
Then press the Stopp
button
Deleting the radio code
1. Press simultaneously the UP and DOWN button on the transmitter.
Press then 6 times the STOPP button.
2. Press then within 10 seconds the UP button. The motor will confirm
the deletion of the code through a short vibration
1
6
Simultaneously
Then press 6 times
press the Up / Down
the Stopp button
button
Changing the direction of the rotation
Press simultaneously the UP and DOWN button on the transmitter.
Press then the STOPP button 4 times.
Press then within 10 seconds the UP button. The motor will confirm
the deletion of the code through a short vibration.
ATTENTION! When you change the direction of the ro-
tation the transmitter will be removed from the motor.
Please program it again as described above.
1
4
Then press 4 times
Simultaneously press
the Stopp button
the Up / Down button

IMPORTANT!

The UP button must close the awning!
If the awning is e.g. controlled by a sun / wind sensor
or a vibration sensor, the awning would open if the
motor's direction of rotation was set incorrectly!
An incorrectly set direction of rotation of the motor
can lead to considerable damage to the awning and to
personal injury!
www.paramondo.de
45
1
(motor vibrates)
Press the Up
button
1
(motor vibrates)
Press Up
button
Tabla de contenido
loading

Este manual también es adecuado para:

Line

Tabla de contenido