Identification; Product Mark And Model Designation; Name And Address Of The Manufacturer; Product Description - Weka 126.3021.00 Instrucciones De Montaje

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26

3. Identification

3.1. Product mark and model designation

Solid wood summerhouse in Nordic spruce with 28 mm wall thicknesses
General
All wood parts in Nordic spruce
Floor
Substructure of pressure-treated floor beams
19 mm thick tongue and groove floorboards
Wall assembly
28 mm thick tongue and groove logs
Door
Solid door with Profile cylinder with 3 keys
Roof
19mm thick roof boards nailed to study roof purlins

3.2. Name and address of the manufacturer

Manufacturer:
weka Holzbau GmbH
Johannestr. 16
D-17034 Neubrandenburg
Tel.
Fax

4. Product description

4.1. General functions and area of application

The cabins are intended exclusively for the storage of garden equipment etc. or as a place to relax for a short
while and enjoy your garden. You are not permitted to use the cabin as a residence or heated accommodation.

4.2. Dimensions

You can find the dimensions on the views included in the pack.

4.3. Safety information

Selection of the substrate
The ground under the cabin should be level, horizontal and built up. If your cabin is located near slopes and
basements, you should consult a local builder. Otherwise, there may be a risk of collapse.
Built-up ground must be compressed to ensure that the cabin does not sink, otherwise damage may occur. Any
turf must also be removed.
Space requirements
The space required depends on the size of your cabin. The cabin must always be accessible from the outside
on all sides to allow for inspection, ventilation and protection against weathering. The space required should be
approximately 1.0 – 1.5 m larger than your cabin on all sides.
Safety information and warnings
In order to prevent accidents, we recommend that children be kept out of the direct vicinity during assembly.
During assembly, children under the age of 14 should be kept at least 3 m from the assembly site.
Techn. Änderungen vorbehalten!
: (0049)-395 429080
: (0049)-395 4290883
Alle Maßangaben sind ca. Maße.
10
 Copyright HRB 3662
Tabla de contenido
loading

Este manual también es adecuado para:

126.3024.00126.3030.00

Tabla de contenido