Description Of The Device; Operation; Energy Saving Tips - Mobicool F16 AC Instrucciones De Uso

Operation

5.1

Description of the device

Connection sockets and control panel (rear of the device):
No. in
Bezeichnung
fig. 1, page 3
1 AC voltage socket
2 Status LED
3 ECO switch
6 Operation
CAUTION! Health hazard!
!
Food may only be stored in its original packaging or in suitable
containers.
NOTE
I
 Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and mainte-
nance" on page 10).
 A few water drops may form inside the cooler if it has been cool-
ing for a lengthy period. This is normal because the moisture in
the air condenses to water when the temperature in the cooler
falls. The cooler is not defective. Wipe it out with a dry cloth if
necessary.
6.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler unit, use the cooler's ECO mode.
8
F16 AC
EN