Tabla de contenido
Idiomas disponibles
Idiomas disponibles
hotplate, the induction cooktop will start heating at the preset power level
of 1600W. The display will show "1600" and the fan will start running.
3. If you remove the cookware from the induction cooktop, the display will
show the error message E0 and a sound will be made. After a while the
cooktop will switch to the stand-by mode.
4. If cookware unsuitable for induction cooking is placed on the induction
cooktop, then, heating will not start after the MENU button is pressed, and
the display will show the error message E0 and a sound will be made. After
a while the cooktop will switch to the stand-by mode.
Setting the power level
1. When the induction cooktop is started for the first time, the power level is
automatically set to 1600W. If the power level display indicator is lit on the
control panel, use the control dial to set the required power in the range of
200 to 2000W by steps of 200.
2. If a different indicator is lit on the control panel, first use the MENU button to
switch to the power display mode and then use the control dial to set the
power.
Setting the temperature
Using the MENU touch button switch the display to the temperature display
mode. The temperature indicator will be lit on the control panel. When the
induction cooktop is started for the first time, the temperature is automatically
set to 240°C. Using the control dial select the desired temperature in the range
of 60 to 240°C by steps of 20°C.
Setting a combination of Power and Timer
1. Press the MENU touch button repeatedly until the Power (P) and Timer (
modes are shown at the same time. The indication "0:00" will appear on
the display. Using the control dial set the automatic shut off time in the
range of 1 minute to 3 hours. Turn the control dial to increase or decrease
the automatic shut off time by steps of 1 minute.
2. The set time will flash on the display for 5 seconds and then the display will
switch to the power level. The power is preset to 1600W. The power setting
can be changed using the control dial. Until the automatic shut off of the
induction cooktop, the remaining time and the power will alternate on the
display. While the time is counting down, the set power can be changed
using the control dial as necessary.
Instructions for use
English
)
7
Tabla de contenido
