Battery Replacement; Direct Plug-In Transformer - Welch Allyn LumiView Instrucciones De Operación

Battery Replacement

Be sure power is off.
l
Remove both screws from back of power source with Phillips
l
head screwdriver.
Grasp the belt clip, gently pull back and down on the housing.
l
(Steps 2 and 3)
Lift battery out and unplug from unit.
l
Replace with new battery and reverse above steps.
l
Step 1
Step 3
NOTE: Power source housing screws must be securely tightened
in order to properly ho/d electrical components in place.

Direct Plug-In Transformer

Plug Power cord from the binocular otoscope into the Direct
l
Plug-In Power cord.
Push in until firmly in place.
l
Gently screw the external connector sleeve clockwise to
l
secure (optional).
The instrument is now ready for use.
l
Plug direct power source into a nearby receptacle.
l
16
Step 2
Step 4