Bosch GHG 500-2 PROFESSIONAL Instrucciones De Servicio página 10

Product Specifications
Hot Air Blower GHG ...
PROFESSIONAL
Order number 0 601 ...
Voltage
Power consumption max.
Air flow approx.
Temperature at nozzle outlet approx.
Temperature measuring accuracy
at the nozzle outlet
on the display
Display operating temperature*
Weight (without accessories) approx.
Protection class
* Outside of the operating temperature, the display can become black.
Please observe the order number of your unit. The trade names of the individual units may vary.
Noise Information
Measured values determined according to EN 50 144.
Typically, the A-weighted sound pressure level of the
product is less than 70 dB(A).
Product Elements
Please open the foldout page with the illustration of the
tool and leave it open while you read these operating
instructions.
The numbering of the product elements refers to the
illustration of the unit on the graphic page.
1 Nozzle
2 Heat protection
3 GHG 500-2/GHG 600-3:
On/off switch/Air flow and temperature regulator
3 GHG 630 DCE:
On/off switch/Air flow regulator
4 Button for setting the temperature
(GHG 630 DCE)
5 Display (GHG 630 DCE)
6 Wide nozzle*
7 Glass protection nozzle*
8 Reflector nozzle*
9 Welding rod*
10 Welding shoe*
11 Reduction nozzle*
12 Heat-shrinkable tubing*
* Not all the accessories illustrated or described are in-
cluded in standard delivery.
1 609 929 E44 • (03.12) T
500-2
... 94A 0..
[V] 220...240
[W] 1600
[l/min] 240/450
[°C] 300/500
±10 %
–
[°C] –
[kg] 0.75
/ II
Intended Use
The unit is intended for the forming and welding of
plastic, removal of paint and the warming of heat-
shrinkable tubing.
It is also suitable for soldering and tinning, loosening of
adhesive joints and the defrosting of water lines.
The unit must not be damp and must also not be
s
operated in damp surroundings.
Before each use of the unit, check the cable and
s
plug. If damage is detected, do not use the unit.
Have repairs performed only by a qualified
technician. Never open the unit yourself.
Connect units that are used in the open via a resid-
s
ual current device (RCD) with an actuating current
of 30 mA maximum. Do not operate the unit in rain
or moisture.
Do not carry or hang up the unit by the cable.
s
Always direct the cable to the rear away from the
s
unit.
English–1
600-3 630 DCE
... 94B 0.. ... 94C 7..
220...240 115...127
1800 1500
250/350/500 110/250/400 150/300/500
50/400/600 50 ... 600
±10 % ±10 %
– ±5 %
– 0 ... +50
0.8 0.9
/ II / II
For Your Safety
Working safely with this unit is pos-
sible only when the operating and
safety information are read com-
pletely and the instructions con-
tained therein are strictly followed.
The workplace should be well ventilat-
ed. Gases and vapours that occur are
frequently detrimental to health.
630 DCE
... 94C 7..
220...240
2000
50 ... 630
±10 %
±5 %
0 ... +50
0.9
/ II