New Typical; Adjust The Joystick-Sensitivity; Operating Hour Meter; Problem Chart - Futurelight CP-256 Manual Del Usuario

6.10.5 New typical

Select " Setup 5. New typical" via the Up/Down-buttons or the Data Entry fader. Press the Enter-button.
Select the desired menu via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
Select language
Within the menu "Select Language", you can change the desired language. Select the desired language via
the Up/Down-buttons or the Data Entry fader and press the Enter-button.
Select code
Within the menu "Select Code", you can change the preset code for the main menu and for the Setup-menu.
Select New Menu Code in order to change the code for the main menu or New Setup Code in order to
change the code for the setup menu and press the Enter-button.
Enter the new code via the Projector Select buttons and press the Enter-button. If you want to unlock the
respective menu, only press the Enter-button without entering any number.
Addressing mode
Within this menu, you can adjust how the CP-256 shall assign the DMX-addresses. The standard setting is
"Automat 16", i.e. the CP-256 will automatically assign 16 DMX-channels to every projector. The setting
"Automat in Row" means that the DMX-adresses will be assigned in accordance with the actually required
DMX-channels of a projector (e. g. 4 channels for Futurelight SC-240). The setting "Manually" means that the
user can freely assign the DMX-adresses.
Select the desired setting via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
Greeting text
Within this menu, you can change the greeting text. Please note that the greeting text can only be changed
once and contain a maximum of 64 letters.
Press the Enter-button. The cursor of the second field starts flashing and you can change the letters via the
Up/Down-buttons or the Data Entry fader. You can jump from one field to another using the Left/Right-
buttons. As soon as you have finished your inputs, press the Escape-button and the Enter-button in order to
save the settings.

6.10.6 Adjust the Joystick-sensitivity

With the CP-256 you can adjust the Joystick-sensitivity steplessly between 0 % (lowest sensitivity) and 100
% (highest sensitivity).
Select "Setup 6. Joy Config" via the Up/Down-buttons or the Data Entry fader. Press the Enter-button. Select
the desired Joystick-sensitivity via the Up/Down-buttons or the Data Entry fader and press the Enter-button
twice.

6.10.7 Operating hour meter

Select " Setup 7. Worked time" via the Up/Down-buttons or the Data Entry fader and press the Enter-button.
The display shows the operating hours of the device.
PROBLEM:
No power.
Cannot enter main menu.
The colour or gobo cannot
be saved in the Preset
Macro.
The program cannot be
edited.
The individual scenes are
not displayed when editing
a program.

7. Problem chart

CAUSE:
The power unit is not connected.
Forgot code or wrong input.
The controller could not save the
settings.
The last scene has not been saved.
The Recall-button has not been
pressed.
38
REMEDY:
Check the connection cable of the
power unit and any extension-cables.
Open the envelope with the Master
Code and follow the instructions.
Please enter the settings again and
save every projector individually.
Check if all scenes of the program are
available. Edit the program again and
save the last scene by pressing the
Enter-button.
Press the Recall-button in order to
display the saved scene.