MS Turn Serie Manual De Instrucciones página 55

13
(Figure 5.2.2)
(Figure 5.2.3)
4. Make sure that the five-point harness is close to the child, but not the
child.
5. Make sure that the adjustment of the shoulder strap is correct and not
distorted.
6. Make sure that the height of the shoulder pad is the same as the height
of the child's shoulder.
7. Make sure that the five-point snap is locked.
8. Make sure the seat is in the 5 position.
5.2.7 Insert the two ISOFIT connectors (12)
into the ISOFIT guide (02) until you hear the
"tick" sound, and the ISOFIT indicator (13) tur-
ns green. (Figure 5.2.1) (Figure 5.1.2)
5.2.8 Push the seat securely until it is close
to the back of the vehicle seat. (Figure 5.2.3)
Note: The ISOFIT connector (12) is insta-
lled correctly only if the ISOFIT indicator (13) is
completely green.
In order to ensure the safety of the child,
after each installation, please pay attention to
check the matter:
1. Ensure that the two ISOFIT connectors
are properly connected to the vehicle ISOFIX
fixed point and that the ISOFIT connection
indicator is fully indicated as green.
2. Make sure that the child's safety seat is
tightly attached to the vehicle seat.
3. Make sure that the pull-up belt is tight
and the pull-up indicator is green.
55