Instrukcja Obsługi - MSW Procat1200 Manual De Instrucciones

EN
After activation the motor • Current and voltage
is too loud. It is not possi- too low
ble to suspend a load. • The capacitor is
damaged.
Unusually loud noises • Incorrect lubrication
• Transmission and
bearing damaged due
to wear and tear
• Incorrectly mounted
Incorrect power supply • No earthing
to hoist • Internal cabling in
contact with the
housing
The traverse mechanism • The traverse button
does not work is faulty
The motor is unable to lift • Continuous operati-
the load on leads to excessive
build up of heat in the
internal motor coils
and may even lead to
it burning out
• Supply correct cur-
rent and voltage
• Replace the capacitor
• Apply more grease
• Check and replace
transmission and
bearing if needed
• Check assembly and
repair element ma-
king the noise
• Check or connect
earth
• Check internal cabling
• Repair or adjust the
traverse button
• Cool the motor and
then start it up as per
normal
12
Rev. 27.02.2017
INSTRUKCJA OBSŁUGI
PROCAT 500
PROCAT 300
PROCAT 1200
PROCAT 800
M S W M O T O R T E C H N I C S