Information About Noise Level And Vibrations; Certificate Of Conformity - Narex EVP 13 G-2H3 Instrucciones De Uso

Information about noise level and
vibrations
The values have been measured in conformity with EN 60745.
Drilling
Acoustic pressure level L = 81 dB (A)
pA
Acoustic power level L = 92 dB (A)
wA
In accuracy of measurements K = 3 dB (A)
Percussion drilling
Acoustic pressure level L = 97 dB (A)
pA
Acoustic power level L = 108 dB (A)
wA
In accuracy of measurements K = 3 dB (A)
CAUTION! Operating noise.
Use ear protection!
Vibration emission value ah (vector sum for three directions) and
uncertainty K measured in accordance with EN 60 745:
Drilling a = 1.2 m/s 2
h,D
Percussion drilling a = 13.3 m/s
h,ID
In accuracy of measurements K = 1,5 m/s
The emission values specified (vibration, noise) were measured in
accordance with the test conditions stipulated in EN 60 745 and are intended
for machine comparisons. They are also used for making preliminary
estimates regarding vibration and noise loads during operation.
The emission values specified refer to the main applications for which the
power tool is used. If the electric power tool is used for other applications,
with other tools or is not maintained sufficiently prior to operation,
however, the vibration and noise load may be higher when the tool is used.
Take into account any machine idling times and downtimes to estimate
these values more accurately for a specified time period. This may
significantly reduce the load during the machine operating period.

Certificate of Conformity

We declare that the device meets requirements of the following standards
and directivesc.
Safety:
EN 60745-1; EN 60745-2-1
Directive 2006/42/EC
Electromagnetic compatibility:
EN 50366; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3
Directive 2004/108/EC
2012
Narex s.r.o.
Chelčického 1932
470 01 Česká Lípa
Changes are reserved
2
2
Antonín Pomeisl
CEO of the company
01.01.2012
English
17