Setting Language; Service Searching; Auto Scan - npg DHT31 NRS Manual De Usuario

5. Setting Language

5. 1 Setting Language
User can select a preferred language among various languages at Installation
page.
(1) Press <Menu> to enter main menu.
(2) Press <Up/Down> until switching to "SETUP&MORE" item.
(3) Press <Left/Right> until switching to "SETUP". Then press <OK> to enter.
(4) Press <Left/Right> until switching to "Installation".
(5) Press <OK> to enter the "Installation" menu.
(6) Press <Up/Down> to focus on "OSD Language" bar.
(7) Press <Left/Right> to select one language.
(8) Press <Up/Down> to focus on "Audio Language" bar.
(9) Press <Left/Right> to select one language.
(10) Press <Up/Down> to focus on "Subtitle Language" bar.
(11) Press <Left/Right> to select one language.
(12) Press <Exit> to save current settings.

5.2 Service Searching

Scan possible frequencies to search services. Select user's country site in
"Country Setting" menu at first. The corresponding country's default fre-
quency table would be loaded then. In autoscan, the frequencies in table would
be scaned one by one.
(1) Press <Menu> to enter main menu.
(2) Press <Up/Down> until switching to "SETUP&MORE" item.
(3) Press <Left/Right> until switching to "SETUP". Then press <OK> to enter.
(4) Press <Left/Right> until switching to "Installation".
(5) Press <OK> to enter the "Installation" menu.
(6) Press <Up/Down> to focus on "Country Setting" bar.
(7) Press <Left/Right> to select country.
(8) Press <Up/Down> to select "Auto Scan" or "Manual Scan".

5.2. 1 Auto Scan

Auto Scan will erase the database first,
and scans default frequency and band-
width by Country Setting. Follow the
steps (1) ~ (8) at section 5. 1 .
(9) Press <OK>. A dialog would appear
to confirm whether to empty data-
base.
(10) Press <OK> to confirm the empty
action and start auto scan.
6
www.npgtech.com