Assembly - Weed Eater WE20VB Manual De Instrucciones

PACKING LIST
• 20V Blower
• Blower Tube
• 20V 2Ah Battery (WE20VRB)
• 20V Charger (WE20VCH)
• Instruction Manual
If any parts are damaged or missing, please
call 1-855-378-6903.
BATTERY REMOVAL
1. Press in and hold the latch button (1)
with firm grip.
2. Grasp the trigger handle (2) firmly. Pull
the battery pack out of the handle.
BATTERY INSTALLATION
1. Align the tongue (3) of the battery pack
with the cavity in the handle housing.
2. Grasp the trigger handle (2) firmly.
3. Push the battery pack into the handle
until both sides lock. The latch button
will click when locked into place.
4. Do not use force when inserting the
battery pack. It should slide into place
and click.
3
2
NOTE: The battery pack fits snugly into the
handle to prevent accidental dislodging. It
may require a strong pull to remove.
IMPORTANT: The battery is not shipped fully
charged. It is recommended that the battery be
fully charged before initial use. With regular
use, the battery pack will take 4 hours or less
to fully charge. It is recommended that the
battery be charged every 3 months when the
blower is not in use. The battery's run time will
improve after the third or fourth charge.

ASSEMBLY

BLOWER TUBE ASSEMBLY
starting that could cause serious personal
injury, always remove the battery pack from
the tool when assembling parts.
1.
1
2.
3.
6
WARNING
: To prevent accidental
Tab
Tube
Groove
Align either of the grooves on the tube
with the tabs on the blower housing.
Push the tube onto the blower housing
until the tab engages the grooves.
Unlock Lock
Turn the tube in the direction of the
arrow until both of the tabs slide into the
lock positions.
A
Install tube A onto tube B and twist
clockwise until the tube locks into
position.
Lock position
B