ENERGY SISTEM ENERGY Stick Serie Manual De Usuario página 13

PLAYbACK OF WAv RECORDINGS
≥
The sound files that you recorded are stored at the root directory. The files are stored in WAV format. You can listen to these files by
selecting the VOICE option at the main menu. Doing so will bring you to the recordings playback screen, where only the WAV files inside the
memory are available. Select the file you want to hear using PREVIOUS/NEXT and press PLAY to begin the playback. To exit the RECORD mode,
hold the MENU button.
While the playback is paused on the record playback screen, you can access the "Browser" submenu by pressing MENU. Browse through
the different options with the PREVIOUS/NEXT buttons and select one by pressing the PLAY button.
"Browser": It shows the recordings inside the built-in memory. Use the PREVIOUS/NEXT buttons to find the song you want to play and
1.
press PLAY to select it. Press PLAY to enter folders and MENU to go back.
"Delete file": Allows you to delete the recording currently selected.
2.
"Delete all": Eliminates all WAV inside the player's built-in memory.
3.
"Exit": Brings you back to the recordings player screen. Alternatively you can go back at any time pressing MENU.
4.
You can leave the VOICE mode back to the main menu by holding the MENU button at any time.
SCREEN AND LANGUAGE SETTINGS
≥
You can configure multiple aspects of your MP3 Energy very easily. At the main menu select the SETTINGS option and choose the one you
seek pressing the PLAY button.
To adjust the time when the screen will get darker to save battery after the last button press choose "Backlight time " option. Choose 0
seconds if you want the screen always lit.
You can select the player language between English, Spanish and French selecting them from the "Language" menu.
To know the amount of free memory available in your player's memory, choose SETTINGS -> Memory info from the main menu.
FIRMWARE REINSTALLATION
≥
Your MP3 Energy has an installed operating system, usually called firmware, which sometimes needs to be reinstalled. The process is
easy, but has to be performed carefully, and only when it is really necessary. If you see that the player halts, reboots randomly, or you
have problems to access the memory content from your computer, then try pressing the RESET button with a needle or clip. If the problem
persists then the firmware might be damaged and you should reinstall the latest version available.
To reinstall the firmware, access manually from a web browser to www.energysistem.com. Select your model at the products section and
download the latest version available from the download zone. Uncompress the file in your computer and follow the included instructions in PDF
format.
PC CONNECTION
≥
In order to enjoy the best sound for your favorite music with your MP3 Energy, you have to first copy the music files from your PC to its
internal memory.
Connect your player to a free USB port of your computer using the USB connector. The device will be detected automatically without
installing any driver. Once detected, you can read/write to the device's memory just as if you where using a regular disk drive. After all the
data is transferred, disconnect the player from the computer.
IMPORTANT: To avoid any data loss, always perform a safe USB device extraction before disconnecting the USB cable from the device of
the PC. In Windows XP, for example, you can find the safe extraction icon in the task bar, next to the system clock.
13