Idiomas disponibles
Idiomas disponibles
CAUTION: The product's lifespan can be reduced in a single use if
put under considerable stress (e.g. after an extreme fall, fall factor
> 1). Perform a careful visual check of the equipment before and
after each use!
The product must be immediately replaced in the following cases:
•
after a hard fall (extreme mechanical stress)
•
if lines or seams are damaged (fleece build-up, loose threads,
etc.)
•
after exposure to extreme temperatures, heat generated by
contact or rubbing (visible melting or melting traces)
•
in the case of irreversible or heavy soiling (e.g. contact with
chemicals, bitumen, oil, etc.) Markings of any kind (e.g. with
lacquer marker) on the via ferrata set are considered to be
chemical contaminations and affect the product's lifespan. If
the via ferrata set is old, dispose of the product to avoid further
dangerous use.
•
If the colour indicator becomes visible [10], the product needs
to be replaced immediately and may not be used.
Maintenance, modifications, repairs
Check your via ferrata set before and after each use for any
damage or defects compared with its original condition. Even light
falls may lead to torn seams. In this case, the fasteners must be
discarded immediately. If the shock absorber has fulfilled its
function once, the complete set must be discarded. Any
modifications, extensions or repairs may only be performed by
SKYLOTEC.
14 14
