LUCCI UC7087T Manual De Instrucciones página 5

Installation Instructions
9) Connect TO MOTOR N of receiver wire to the "N (Neutral)" terminal of the terminal block.
10) Connect TO MOTOR L of receiver wire to the "L (Motor Live)" terminal of the terminal block.
11) Connect FOR LIGHT of receiver wire to the "L1 (Light Live)" terminal of the terminal block.
12) Connect the connection plug from the fan bracket to the input connection plug from fan body.
13) Push the connected wires up into the canopy.
14) Lay the receiver in the canopy. (See Fig. 4).
15) Reinstall the canopy on to the mounting bracket.
16) Restore electrical power to the circuit.
Fig. 3 –b
5 | P a g e