Mobil Tv Instruction Manual - Nevir NVR-7502-19HDD-N Manual De Instrucciones

MOBIL TV INSTRUCTION MANUAL

Switching the TV On Using 12 Volt
1. Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to
the battery of car, making sure to observe the correct polarity.
2. Plug the other side of 12 volt cable to DC 12 socket at the back of the TV. Then the standby LED lights
up.
3. Press the " " button, P+ / P- or a numeric button on the remote control or press the "
button on the TV. The TV will then switch on.
4. Adjust for best picture through antenna position or set TV channels again if necessary.
Switching the TV Off
1. Press the " " button on the remote control or press the "
standby mode.
2. Unplug cable connectors and power plugs.
ATTENTION: 12 V Input :
V+
V+
V- V-
English - 38 -
" switch on the TV, so the TV will switch to
" button, - or +