IMG STAGELINE EMA-400 Manual De Instrucciones página 5

Please unfold page 3. Then you can always see the
operating elements and connections described in
the figures.
1 Operating Elements and Connections
1 Power LED
2 Power switch
3 Inputs (XLR jacks, balanced) of channels 1 to 4:
connection of balanced capacitor microphones or
electret microphones designed for a 48 V phantom
power supply
4 Outputs (XLR chassis plugs, balanced) of chan-
nels 1 to 4: connection to balanced microphone
inputs on the audio unit (mixer or amplifier)
5 Mains fuse; replace a blown fuse by one of the
same type only
6 Mains cable to connect 230 V~/50 Hz
2 Applications
The phantom power supply unit EMA-400 supplies the
required voltage to capacitor microphones or electret
microphones designed for a phantom power of 48 V .
Thus, it allows connection of these microphones to
mixers or amplifiers which do not provide any phantom
power. It is possible to connect up to four microphones
to the unit.
3 Safety Notes
This unit corresponds to the directive for electromag-
netic compatibility 89/336/EEC and to the low voltage
directive 73/23/EEC.
Attention!
The unit is supplied with hazardous mains voltage
(230 V~). Leave servicing to skilled personnel only.
Inexpert handling may cause an electric shock
hazard. Furthermore, any guarantee claim will expire
if the unit has been opened.
Please observe the following items in any case:
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity, and heat (admissible ambient temperature
range 0 – 40 °C).
Do not place any vessels filled with liquid, e. g. drink-
ing glasses, on the unit.
Do not operate the unit and immediately disconnect
the plug from the mains socket
1. if there is visible damage to the unit or to the
mains cable,
2. if a defect might have occurred after the unit was
dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the unit must be repaired by skilled per-
sonnel.
A damaged mains cable must be replaced by the
manufacturer or skilled personnel only.
Never pull the mains cable to disconnect the mains
plug from the socket.
For cleaning only use a dry, soft cloth, never use
chemicals or water.
If the unit is used for other purposes than originally
intended, if it is not correctly connected or not re-
paired in an expert way, no liability for any damage
will be accepted.
If the unit is to be put out of operation definitively,
take it to a local recycling plant for disposal.
Important for U.K. Customers!
The wires in this mains lead are coloured in accord-
ance with the following code:
blue = neutral, brown = live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows:
1. The wire which is coloured blue must be con-
nected to the terminal in the plug which is marked
with the letter N or coloured black.
2. The wire which is coloured brown must be con-
nected to the terminal which is marked with the
letter L or coloured red.
4 Setting the Unit into Operation
Up to four capacitor microphones or electret micro-
phones can be connected to the phantom power supply
unit. The microphones must have a balanced connec-
tion.
1) Connect the cables of the microphones to the
"MICROPHONE INPUTS" (3) of channels 1 to 4.
(The XLR jacks are provided with a latching device.
To release it, press the PUSH lever of the corre-
sponding jack when disconnecting the plug.)
2) Connect the "OUTPUTS" (4) of channels 1 to 4 to
balanced microphone inputs of the audio unit used
(mixer or amplifier).
3) Connect the plug of the mains cable (6) to a mains
socket (230 V~/50 Hz).
4) Switch on the phantom power supply unit with the
switch "POWER" (2). With the unit switched on, the
power LED (1) next to the switch lights up. After op-
eration, switch off the unit with the "POWER" switch.
5 Specifications
Frequency range: . . . . . . . . 20 – 20 000 Hz
Phantom power: . . . . . . . . . 48 V
Power supply:. . . . . . . . . . . 230 V~/50 Hz
Power consumption:. . . . . . 20 VA
Ambient temperature:. . . . . 0 – 40 °C
Dimensions (W x H x D): . . 255 x 55 x 160 mm
Weight: . . . . . . . . . . . . . . . . 1.5 kg
According to the manufacturer.
Subject to technical change.
GB
(±2 V)
5