CYBEX gold ETERNIS S Manual Del Propietário página 65

6
CHECK YOUR WORK
MAKE SURE the belt is tight and locked. If you
can move the child restraint more than 1 in. (2.5
cm) side to side or front to back at the
FACING belt path, the vehicle belt is not tight
enough.
Re-check recline level, pg.63.
USING CHILD RESTRAINT
WITH LAP BELT
6
REAR-
REAR-FACING
NOTE: The Lock-Off is for lap/shoulder belt
systems only and is NOT needed for lap belt
only installation.
While pushing the Child Restraint down and into
the seat crease (pg. 24), remove all slack at the
belt path and continue tightening the lap belt.
If you have not tightly secured the child
restraint, try again or:
• lock the vehicle retractor
• move it to another location
• or install with the lower anchor strap.
To remove seat, unbuckle the vehicle seat belt.
65