User's Manual
Remote control
distance is
short, lose
control
Computer
display is faint
Computer
display image
does not fill the
screen
Noise signals al
turning off
Can not operate
this machine
DANGER:.Do.not.leave.the.unit.with.the.same.picture.on.the.screen.
for.a.long.period.of.time..If.a.high.contrast.picture.remains.static.on.
the.screen.for.a.long.time,.it.may.cause.a.shadow.on.it..Usually,.it.will.
disappear. after. some. time. once. the. unit. is. turned. off.. Nevertheless,.
this.problem.cannot.be.repaired.and.is.not.covered.by.the.guarantee.
44
-.Receive.window.of.remote.
control.was.covered.by.
objects.
-.The.battery.energy.of.
remote.control.is.too.low.
-.Adjustment.is.incorrect.
-.Display.mode.is.incorrect.
-.Adjustment.is.incorrect.
-.Display.mode.is.incorrect.
-.Electrical.release.at.turning.
off.
-.Exterior.influence,.for.
example.lightning,.static.
electricity.and.so.on,.which.
are.possibly.to.disturb.the.
normal.operation.of.this.
machine.
-.Remove.objets.obstructing.
the.receiver.window.of.remote.
control.
-.Change.battery.
-.Use.auto-adjustment.function.
-.Use.recommended.mode.
-.Use.auto-adjustment.function.
-.Enter.PICTURE.to.adjust.
horizontal.or.vertical.position.
-.Use.recommended.mode.
-.It.is.normal.
-.Press. .button.to.turn.off.
electrical.source,.then.press. .
button.to.turn.on.the.TV.again.
after.1-2.minutes.